White ABS for the Skull. Brown HIPS for the base.

.18 mm layer height

20% infill

Total print time about 20 hours.

Model found on Thingiverse: http://www.thingiverse.com/thing:308335

Model created by Byambaa

Model from Thingiverse

HIPS Filament

.18 mm Layer Height

20% infill

Printed in two pieces - body sitting upright and head printed from neck up. No supports on either - did use a raft for the head though.

Print time approximately 9 hours combined

Model Created by Justin Butschi

Printed in ABS

Print time about 30 hours

.18 mm layer height

Supports were used.